Refinish Coatings Repair Product Sample Pack
Air Dry Fillers:
- 652 Gray Crack Filler- Air Dry Filler – Use this for void areas 1/16” thick or less. Dry by itself or use hair
dryer. Sand with 320, 400 or 600 grit. This filler is great for filling small gaps. Dries fast and sands easily.
Do not expose to freezing temperatures. - 651 Black Crack Filler – Air Dry Filler – NEW ! – Exactly like our original Gray Crack Filler – just a different
color. - 653 White Crack Filler –Air Dry Filler – – Exactly like our original Gray Crack Filler – just a different color.
- 654 Beige Flex Fill – Air Dry Filler – Use this urethane filler to fill any size gaps and voids. Extremely strong.
Dry with hair dryer or allow to dry by itself. Sand with 320, 400, 600 grits. Do not expose to freezing
temperatures. - 655 Black Flex Fill – Air Dry Filler – Exactly like our original Beige Flex Fill – just a different color.
Heat Cure Compounds:
- 664 ‘S’ Sandable Heat Cure Compound- Use this when light sanding is desired or needed. For best results,
use another compound over if texturing it is not adequate. - 665 Deep Flex Fill Heat Cure Compound- Use this in deeper areas. This compound contains a nylon
filament to assist in filling properties and for added strength. - 668 Soft-Flex Heat Cure Compound- This is our softest compound with excellent graining features and
tolerates lots of heat. Use when a soft flexing repair is required on seating vinyl. The blue tint allows for
good visual of how texture looks and to see void spots in the filling process. - 675 Standard Heat Cure Compound- This product is our thinnest viscosity and is used as a matter of
preference when a thinner compound is needed. - 676 Red Base Fill Heat Cure Compound- Use this product by plucking some out of the jar and balling it up
with your fingers, then pressing it into the void area where needed. It will not spread very well like other
compounds. Level it out with the palate knife and cook with heat gun longer than normal, since it most
likely is packed in quite thick. *A long cook is required with this and all compounds to achieve full
strength and performance of the repair. This compound is meant to be a time saver when filling areas on
curves or edges or where sculpting is needed. - 680 THICK Heat Cure Compound –It is just like our 675 Standard Compound except with a thicker, more
desirable viscosity. This is our most popular heat cure compound.
For more information or any questions about our repair products, please give us a call and thank you for evaluating
our specialty items.